zippppper project
for YKK
Five zippers, designed for YKK which manufactures and sells a diverse range of fastening products. In lieu of focusing on superficial finishings or decoration, it was important to take a step back and delve into the fundamental question, “What exactly is a zipper?” Fastening elements aligned together on a straight line are interlocked together or separated depending on the movement of the slider.
The basic concept of a zipper is to open and close the opening between two pieces of material without any gaps, but by thoroughly assessing each component individually and further reassessment- 5 new zippers were created.
01 Zipper that crosses
In contrast to ordinary zippers which can only be opened or closed in one direction, one zipper is crossed with another one at a right angle enabling them to be opened and closed “lengthwise” and “widthwise.” The intersection part of the zipper is fixed by using four small elements that snap on to each other.
02 Zipper with gaps
While still keeping the typical usability of a zipper, new functions were intended with the creation of gaps, such as breathability, flexibility and the means to pass cords or cables, by fastening at “points” rather than in a “line”. Elements are fastened on top of each other like a bu-tton and not side by side.
03 Zipper to fasten three elements
By moving a three pronged shaped slider, three sets of elements are twisted together, making it possible to go beyond the” flat “dimension and bind fabrics “three dimensionally.” In a single space, three compartments can be simultaneously separated or connected together.
04 Zipper to seamlessly fasten around
Originally zippers have a “start point” and an “end point” but by connecting the two, 360 degrees accessibility from any direction was achieved. Moreover, it became possible to successively add circular parts one after the other.
05 Zipper with a rotating motion
While pulling a slider with one hand, the other hand should hold the bottom of the material so that the zipper stretches linearly making it open and close smoothly. This may be “stressful” to some people, and resolved it by replacing the “linear motion” with a “rotating motion”. When the disc-like slider is rotated, the internal gear clamps the elements and they open and close simultaneously with the movement.
This enabled the zipper to be operated with one hand, without needing to hold the material. In this way, since it was made up of five different approaches and products, the project name is not “Zipper” with 2 “p’s,” but instead we presumed to spell it with “5”, as “Zippppper”.
机器翻译:
YKK的
五个拉链,专为YKK制造及销售的紧固件产品多元化。代替专注于肤浅的表面处理或装饰,它退后一步,并深入到根本问题,“到底是什么拉链?”在一条直线上排列在一起固定元件相互连接在一起或分离的视运动是重要的的滑块。
拉链的基本概念是用于打开和关闭两片材料之间的开口没有任何间隙,但通过单独彻底评估每个组件和进一步reassessment- 5个新拉链创建。
01拉链跨越
与此相反,可以仅在一个方向打开或关闭普通拉链,一个拉链以直角交叉用另一个使它们能够被打开和关闭“纵向”和“横向”。拉链的交叉部分是固定通过使用卡口彼此四个小的元件。
02拉链具有间隙
,同时仍保持一个拉链的典型可用性,新的功能被用于与创作间隙,如透气性,柔韧性,并通过在“点”紧固到通过电线或电缆,该装置的,而不是在“线”。元件固定在像侧由一个按钮,而不是侧彼此的顶部。
03拉链扣上三个要素
通过移动三叉形滑块,三组元件被拧在一起,使得有可能超越”平面“维度和绑定织物‘三维’。在一个单一的空间,三个隔室可同时分离或连接在一起。
04拉链无缝紧固围绕
本来拉链有一个“开始点”和“结束点”,但通过从被取得的任何方向连接两个,360度可访问性。此外,它成为可以连续加圆形部分一前一后。
05拉链具有旋转运动
同时拉动滑块用一只手,另一只手应持材料的底部,这样拉链延伸线使其启闭平稳。这可能是“压力”的一些人,并通过与“旋转运动”取代“直线运动”解决它。当盘状滑块转动时,内齿轮夹持元件和它们打开和与移动同时关闭。
这使得单手操作拉链,而无需保持材料。通过这种方式,因为它是由五个不同的方法和产品,项目名称不是“拉链” 2“P的,”而是我们推测与“5”拼写为“Zippppper”。
视频在这里:http://www.pushthink.com/videos/2d13d955d8ffec25b1d96614a39e76df
来源于:http://www.nendo.jp/en/works/zippppper-project/?erelease
感谢nendo
30赞 14评论 7989人气
4赞 0评论 2916人气
18赞 5评论 4881人气
10赞 3评论 3191人气
确认要删除该条评论吗?
小小心意,大大鼓励
最高赞赏200元
使用支付宝扫描二维码完成支付
使用微信扫描二维码完成支付
当前余额:¥0.00
支付操作会向你普象账户的注册手机号发送验证码
请注意查收
扫一扫添加
普象商务
扫一扫添加
客服微信
扫一扫下载
手机APP
留言板(0)